Is it worth getting a wheel repair machine


We are often asked by this question, "Is it worth getting a wheel repair machine, is it worth refurbishing my alloy wheels?" In short, our answer is always yes. Whether it is to damage or increase or retain the value of the car, we always recommend that you repair or refurbish the alloy as soon as possible rather than later.

Although the corroded wheel will usually cause problems in appearance if it is left for a long time, the degree of corrosion will often reach the level of safety that the wheel cannot be used or completely replaced. As always, we recommend that you be extra careful when corroding and seek the help of professional and technical personnel, who will provide you with timely repair solutions. So a wheel repair machine with good performance is necessary.

If your wheels starts to corrode, our recommendation is to refurbish it as soon as possible. Do not leave them, because corrosion will gradually erode deeper and deeper alloys. At this point, the refurbishment process may not last long. The longer you leave the corrosion, the more likely the corrosion will come back. If you refurbish them in the early stages of corrosion, you are more likely to delay the inevitable.

How do I know the extent of my wheel injury?

Except for obvious reasons, we can only ensure that your wheels are restored to their best condition after training. We can also determine the current state of the alloy before performing any work. The severity of the damage to the decorative alloy varies, and most damage may cover the larger problems of the wheels, and if you drive on the steering wheel, it will also affect the performance of the car. This is what we can find and can advise whether your alloy is truly repairable.

Many people think that alloy wheels are a stylish addition to cars, but in fact they may also increase their value. Obviously, this depends to a certain extent on the age of the car, the manufacturer and model, and the type of wheels, but in most cases, because the newly refurbished wheels will not only greatly improve the overall appearance of the car, but also increase its value. . The higher the value of the car, the greater the chance of refurbishing its wheels to increase its value.

If you already have alloys in your car, but you want to add value, it's worth researching on alloy recoloring. This service can spray powder coatings on alloys like traditional coatings, and then deposit them on a dry surface. Then it is heat treated to form a gel on the surface of the wheel, thereby protecting your aluminum alloy wheel from ultraviolet rays, light scratches, pollution and washing whirlpools. Not only does it add personality to your car, but it will eventually turn your popular brands and models into tailor-made cars, which people may pay very little if you sell them privately. Learn more about the color changes of our custom wheels here.

Another excellent service we provide can add value to your car, namely diamond cutting, diamond cutting can not only change the appearance of your car, attract your attention, and highlight your rim; but did you know that it can also help protect them? they will accumulate more brake dust and road dirt, and will rust over time. The cutting process will remove dirt and ensure that the brake components are in the best condition, and then apply a layer of fresh paint to protect them for a longer time.

Contact immediately to get the wheel repair machine to refurbish and restore your wheel to a new look, whether for safety or value purposes.

More News

Horizontal Wheel Repair Machine

Vertical Wheel Repair Machine

Wheel Straightening Machine

Tire Changer

Wheel Alignment & Balancer

Wheel Washer

Wheel Coating Oven

CNC Lathe

Machining Center

Pipe Thread CNC Lathe

Tools & Accessories

Diesel Injector Test Bench

Close